MIG, TIG, And Stick Welding

MIG Welding:

This is an arc welding process that uses a process in which wire is fed continually through a MIG gun. This process either uses an independent shield gas, a wire that has flux in the center that creates its own shield gas, or, in some cases, both. The shield gas us used to keep the liquid metal from being contaminated before it cools. MIG is an acronym for Metal Inert Gas. This method is the most common for general repairs, maintenance, and fabrication. This is the easiest process to become competent at. For more information and general how to CLICK HERE

TIG Welding:

This process uses a non-consumable tungsten electrode that serves to carry the current to the arc. Argon is the shield gas that is typically used in this process. TIG welding differs from MIG welding in several ways. One of the most notable is that the TIG process requires the welder to use 2 hands. One hand holds and feeds the filler metal and the other holds the TIG gun that delivers the current to liquify the filler metal. TIG is an anagram for Tungsten Inert Gas. This method is used for a variety of things, but one of the most notable applications is the fabrication of car parts…. racecar parts!

Stick Welding:

Stick welding is a process in which a welder uses a shielded electrode or welding rod and an arc that runs between the shielded electrode and the metal surface being welded. This process is sometimes called SMAW, Shielded Metal Arc Welding, or MMA, Manual Metal Arc. The arc melts the rod and the shielding material. The shield, also known as flux, creates a shielding gas that protects the weld similar to the function of shield gas in MIG welding. There are many varieties of flux on welding rods. The appropriate rod to use changes based on application. For more detailed information and resources, CLICK HERE